D1000X Ultrasound Detector
39,000 kr excl VAT
The D1000X is a professional ultrasound detector, based on the latest technology. The detector has heterodyne, frequency division and time expansion systems and also a built-in 16-bit recording system using a Compact Flash card as storage medium. It is equipped with our well-known, high-quality capacitance microphone which has been further improved to give lower noise, wider dynamic range and lower distortion.
The D1000X has a built-in “recorder”, relieving the user from the hassle of operating a separate recording device or laptop with connecting cables. It can be configured to work in a variety of operating modes, but thanks to the use of “Profiles”, switching between different modes is made instantly. Each profile contains all the selectable settings such as sampling rate, triggering mode, time expansion factor and LED intensity and can be prepared in advance and saved in the detector.
At any time, either the direct ultrasonic signal, the heterodyne signal or the frequency division signal can be recorded onto the CF-card. Spoken comments can be recorded by speaking into the microphone while recording in the direct mode, or in a special comment recording mode (at a lower sampling rate). The recording time is limited only by the available space on the CF-card. Upon completion of a recording in the direct mode, the signal will be automatically replayed in time expanded form, if this function is enabled. Time expansion factors from 1 (original speed) to 30 can be chosen. The recordings can be made by manually starting and stopping the recording or through level-activated (and optional frequency selective) triggering. In the latter case, the detector can be set up for unattended capture of calls. Pre- and post-triggering modes with a variety of different settings can be used.
The wav sound files on the CF-card are stamped with date and time and can be read directly on a PC, using a standard CF-card reader. The D1000X also has a serial GPS input, making it possible to save GPS position data in the files.
Please contact us by email (firstname.lastname@example.org) to order the D1000X.
- Additional information
|Dimensions||170 × 80 × 35 mm|
Heterodyne, frequency division (x10), time expansion and direct recording
Advanced electret, jack for external microphone
5 – 235 kHz (frequency division and heterodyne)
|Heterodyne freq. resolution||
0.1 kHz (f0.2 kHz (18-43 kHz)
3.5 mm stereo jack, load impedance 32 ohms or greater
3.5 mm stereo jack, load impedance 500 ohms or greater, ca 600 mVrms at 0 dB
5 x AA size, Alkaline or NiMH recommended
|External DC supply||
7-10 V, 250 mA (average), 700 mA (peak)
ADC Resolution: 16 bits
|GPS connection requirements||